MEAN WELL 데이터시트 — 프로그래머블·랙·특수 전원

MEAN WELL 프로그래머블·랙·특수 전원 — 프로그래머블·랙·모듈 조합형·보안·KNX·양방향 전원. 모델 98개의 데이터시트입니다. PDF를 누르면 MEAN WELL 공식 모델 페이지가 열리고, 맨 위 SPEC 칸이 데이터시트입니다(출력 전압별 시험 성적서·인증서도 같은 페이지). 찾는 모델은 Ctrl+F(핸드폰은 페이지 내 검색)로 찾아보세요.

MEAN WELL 품번은 시리즈-출력(W)-출력 전압(V) 순서입니다. 예를 들어 LRS-350-24 는 LRS 시리즈 · 350W · 24V 출력입니다. 이 글의 모델(LRS-350)에서 출력 전압별 품번은 데이터시트의 주문 정보(Ordering Information)에 있습니다.

📚 MEAN WELL 資料手冊目錄

8 個分類 · 目前分類 프로그래머블·랙·특수 전원 — 其他分類請在目錄中選擇。

查看目錄 →

• 프로그래머블 전원 19개 모델
• 랙 전원 16개 모델
• 모듈 조합형 전원 6개 모델
• 보안·특수 용도 전원 33개 모델
• KNX 빌딩 자동화 전원 20개 모델
• 양방향 전원 (AC⇄DC) 4개 모델

프로그래머블 전원 AC/DC › Programmable Power

SHP Series 10000W~30000W

• 3ψ 3-wire without neutral / 340~530VAC wide input range
• Water / forced air cooling selectable
• Built-in CANBus/Optional PMBus protocol/MODBus-RTU/RS-485
• Output voltage and constant current level programmable
• Active current sharing up to 4 units
• Built-in remote ON-OFF control / Auxilary power / Alarm signal

CSP Series 3000W

• Full range 180~264VAC input
• Built-in active PFC function
• High efficiency up to 93%
• Built-in DC fans for forced air cooling
• Output voltage/current programmable
• Active current sharing up to 9000W(2+1)

PHP Series (Water-cooled) 3500W

• Water-cooled heat dissipation technology
• Output voltage and constant current level programmable
• Support PMBus communication protocol (CANBus optional)
• Support PSUs in parallel connection
• High output voltage available for HV type
• Active current sharing, total system power up to 14000W (3+1)

DPU Series 3200W

• Universal AC Input/ Full Range
• Built-in Active PFC
• High efficiency up to 94.5%
• air cooling by built-in DC fan
• Output voltage and constant current level programmable
• Built-in OR-ing FET, support hot swap (hot) plug function

SPV Series 150W~300W

• Built-in active PFC function
• Output voltage programmable from 20~110%

RST Series 5000W~15KW

• Single output power supply with 5000W / 10000W high wattage
• 3 phase input:3-wire / △196~305VAC or 4-wire / Y340~530VAC
• Built-in active PFC function
• High efficiency up to 91%
• 20000W with built-in parallel (active current sharing) function
• Output voltage and constant current level programmable

RSP-750~3000 Series 750W~3000W

• Programmable high power with active PFC function
• Output voltage programmable
• Constant current level Icc programmable (RSP-750/1600 only)
• 1U low profile (41mm) : RSP-750/ 1000/ 1600/ 2000, 2U profile : RSP-1500/ 2400/ 3000
• Built-in current sharing (except RSP-750)
• 5 years warranty

↑ 맨 위로

랙 전원 AC/DC › Rack Power

RCP Series 1000W~18000W

• Complete rack mountable front end solution: rectifier and charger
• 1U low profile
• 19 inch rack shelf available

NCP Series 3200W

• System Power Solution (PDF)
• Power supply or charger mode selectable by PMBus, CANBus or SBP-001 (only for 24 V/48V models)
• Built-in 2/3 stage charging curves and programmable curve (only for 24V/48V models)
• High efficiency up to 94.5%
• Built-in OR-ing FET or Diode, support hot swap (hot plug)
• Active current sharing up to 10 rack shelves(DHP-1UT-B) and the maximum power supply that can be connected in parallel is 40 units

CMU2 Series NA

• System Power Solution (PDF)
• Integration on system power
• 2 models in 3U 19-inch rackmount and standalone configurations
• 7" touch Panel and buttons for easy on-site operation
• Ethernet port for on-site or remote monitor and control over the system
• Selectable PMBus, CANbus, RS-485, and RS-232 communication protocols

CMU3 Series NA

• System Power Solution (PDF)
• Integration on system power
• Panel-free design with Wi-Fi connectivity for smartphone operation via APP
• 2 models in 1U 19-inch rackmount and standalone configurations
• Ethernet port for on-site or remote monitor and control over the system
• Selectable PMBus, CANbus, RS-485, and Ethernet communication protocols

DRP Series 3200

• System Power Solution (PDF)
• Complete rack mountable front end solution: rectifier and charger
• 1U low profile
• 19 inch rack shelf available

↑ 맨 위로

모듈 조합형 전원 AC/DC › Configurable- Modular Power Supply

NMP Series 650W/1200W

• Medical (2x MOPP) ITE safety approvals
• Suitable for BF application with appropriate system consideration (Touch current < 100uA/264VAC)
• 1U low profile
• Built-in parallel function / output programmable / global enable / remote local ON-OFF / auxiliary DC output / over temperature alarm / DC OK
• Cooling by thermostatically controlled fan with fan alarm function
• 5 years warranty

UMP Series 400W

• Fan-less, 1U design
• Modular design, with DC-DC module cards (NID35/65/100 series models)
• Can be used as a single rail PSU
• wide operating temperature ranges from -30 ~ +70 ° C
• Meet OVC III requirements
• Meet 2x MOPP isolation requirements, ideal for BF rated medical equipment

MP Series 450W/650W/1000W

• Configurable/customizable/flexible power supply
• Built-in active PFC function
• 5 slot output for MP450/650, 7 slot output for MP1k0
• 75W/100W/150W/210W/300W/360W module available

↑ 맨 위로

보안·특수 용도 전원 AC/DC › Security & Specific

Harsh Environment—HEP Series 100W~2300W

• Fanless design
• High efficiency up to 96%
• Wide working temperature range -55~+70℃
• Rugged metal case with IP65 design (IP68 option available), withstand 10G vibration
• Operating altitude up to 5000 meters
• Build-in CANBus and PMBus /MODBus by optional (1000W and 2300W only)

Security—DRS Series 240W & 480W

• Universal input 90~305VAC (277VAC available)
• All-in-one function with Power supply, DC-UPS, battery charger and status monitoring in ONE compact unit
• Signal and alarms design meet UL2524, NFPA1221, BS EN/EN54-4 and GB17945 requirement
• Form C relay contacts and LED indicators for AC Fail, Battery Low, Charger Fail, and DC-OK
• Built-in MODBus protocol, CANBus optional
• Charging curve can be set with SBP-001

Security—PSC Series 35W~160W

• With UPS function (need external batteries)
• Suitable for security industry or battery backup systems
• Built-in active PFC function (PSC-160)
• Case available

Security—DRC Series 40W~180W

• With UPS function (need external batteries)
• Suitable for security industry or battery backup systems
• Assemble on industrial rail TS-35 / 7.5 or 15

Security—SCP & AD/ ADS/ ADD/ LAD Series 35W~600W

• With UPS function (need external batteries) for AD/ADD series
• The LAD series has UART communication function, and posses AC and battery circuit switches with design refer to GB 17945-2010 safety regulations
• Suitable for security industry or battery backup systems

↑ 맨 위로

KNX 빌딩 자동화 전원 AC/DC › KNX

KNX Power 20W~40W

• EIB/KNX power supply with integrated choke
• 1∅, 180~264VAC input
• No load power consumption <0.5W
• Assemble on industrial rail TS-35 / 7.5 or 15

KNX-USB Interface NA

• KNX-USB interface
• No additional external power supply required
• KNX commissioning, addressing and parameter settings
• KNX protocol and system visualization
• Diagnostic operations
• Long messages up to 220 byte APDU

KNX IP Router NA

• KNX IP router
• 4 IP/TP tunnelings
• No additional external power supply required
• Universal Plug and Play
• Telegram filtering
• Built-in web front-end page

KAA-8R Switching Actuator NA

• 8 channel actuator in a compact size
• Suitable for various and mixed applications
• For AX， C-load， capacitive and inductive type of loads
• Program via ETS5.0 software
• Manual control via Push button
• Programmable various time and scene function

KAA-4R4V Dimming Actuator NA

• Dimming and switching LED driver and conventional electronic ballast
• LED indicator for each channel
• Linear or logarithmic dimming curve programmable via ETS software
• Manual control via Push button on the panel
• Programmable various time and scene function
• 3 years warranty

KNX Line Coupler NA

• KNX TP Line Coupler/Repeater
• Telegram filtering function
• Long messages support up to 240 byte APDU
• Trace the subline traffic
• Diagnostic functions
• Manual function

KNX LED Driver 25W~60W

• Constant Current mode output with multiple levels selectable by dip switch
• KNX protocol
• Support emergency lighting (EL)
• Integrated constant light output
• Integrated KNX push button interface
• Synchronization up to 10 units

Gateway 8W

• Comply with IEC 62386 DALI-2, and Part 101/103/207/208
• 2 x channels of DALI bus, for control gear and control device using
• 4 x programmable relays, for electrical switch or curtains control
• DLC software for system settings or remotely through internet
• Built-in LCD display and control buttons to set and view settings
• Built-in timer IC, commission schedule

XLC-KN Series 25W~60W

• Constant power mode output with multiple stages selectable by ETS database
• Plastic housing with class II and PFC design
• Flicker-free, complying with CE ErP directive
• Standby power consumption < 0.5W
• Suitable for emergency lighting (EL) applications
• KNX/EIB protocol, supporting KNX data secure

PWM-KN Series 60W~200W

• Constant Voltage PWM style output with user changeable frequency up to 4KHz compliant IEEE 1789-2015 no risk
• Built-in active PFC function
• Standby power consumption<0.5W
• Integrated KNX control protocol
• No need KNX-DALI gateway

SPWM-KN Series 75W~240W

• Supports multiple output modes including dimming, colour temperature, RGBW
• Constant voltage PWM style output with 1 or 4 channels
• Standby power consumption <0.5W
• Flicker free, complying with CE ErP directive
• Minimum dimming level 0.1%
• 5 years warranty

↑ 맨 위로

양방향 전원 (AC⇄DC) AC/DC › AC⇄DC Green Bidirectional Power

BIC Series 2200W~5000W

• System Power Solution (PDF)
• 1U low profile design
• Full digital design with 93% conversion efficiency for both AC/DC and DC/AC conversion
• Ultrafast switching time between AC/DC and DC/AC of 1ms.
• CB/TUV/UL 62368-1 certified, and design refer to IEC 62477 regulation
• Active current sharing up to 11000W(4+1)

ERS Series 1400W

• Wide input voltage range 10~60VDC / 60~380VDC by models
• High efficiency up to 91%
• Modular design for flexible configuration
• Flexible CC/CV/CP operation modes
• Remote control and monitoring by CANBus protocol via CMU2A control console
• Maximum 64 units ERS-1400 series that can be connected

ERG Series 5000W

• System Power Solution (PDF)
• Wide input voltage range 10~60VDC / 60~420VDC by models
• High efficiency up to 91%
• Modular design for flexible configuration
• Flexible CC/CV operation modes
• Remote control and monitoring by CANBus protocol via CMU2A control console

↑ 맨 위로

자료: MEAN WELL 홈페이지 제품 시리즈 목록 (www.meanwell.com, 2026-10-27 확인) · 특징 문구는 제조사 원문이며, 정확한 값은 데이터시트를 확인해 주세요. 가격·재고는 e구로 부품검색에서 품번으로 찾아 견적요청하실 수 있습니다.