MEAN WELL 데이터시트 — LED 드라이버

MEAN WELL LED 드라이버 — LED 조명용 정전류·정전압 드라이버(HLG·ELG·LPV 등)와 조광 장치. 모델 205개의 데이터시트입니다. PDF를 누르면 MEAN WELL 공식 모델 페이지가 열리고, 맨 위 SPEC 칸이 데이터시트입니다(출력 전압별 시험 성적서·인증서도 같은 페이지). 찾는 모델은 Ctrl+F(핸드폰은 페이지 내 검색)로 찾아보세요.

MEAN WELL 품번은 시리즈-출력(W)-출력 전압(V) 순서입니다. 예를 들어 LRS-350-24 는 LRS 시리즈 · 350W · 24V 출력입니다. 이 글의 모델(LRS-350)에서 출력 전압별 품번은 데이터시트의 주문 정보(Ordering Information)에 있습니다.

← MEAN WELL 데이터시트 전체 분류 (목차)

• LED 드라이버 189개 모델
• LED 조광·주변 장치 16개 모델

LED 드라이버 AC/DC › LED Driver

AP Series 8W~35W

• 90~264VAC input
• Rectangular plastic case with IP42 level
• Class II design, without FG
• Low cost, small and compact size
• Constant voltage mode for APV series
• Constant current mode for APC series

ELG Series 75W~300W

• 100~305VAC input range
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Function options: output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); smart timer dimming; DALI; auxiliary DC output
• Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
• Suitable for LED street lighting and outdoor LED lighting
• 5 years warranty

ELG-C Series 75W~300W

• 100~305VAC input range
• Constant current (C.C.) output
• Constant power (C.P.) output
• Built-in active PFC function
• No load/standby power consumption <0.5W
• Metal case, IP67/IP65 design for indoor or outdoor installations

HBG(P) Series 60W~240W

• Circular shape design: HBG-60 : plastic case; HBG-100/160/240 : metal case; HBG-60P/100P/160P/240P : PCB type
• 90~305VAC input, built-in active PFC function [90~295VAC for HBG-60(P)]
• Circular shape design: HBG-60: plastic case, HBG-100/160/240: metal case HBG-60P/100P/160P/240P:PCB type
• IP67/IP65 design for indoor or outdoor installations for HBG-100/160/240
• Built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) for HBG-100(P)/160(P)/240(P) B type
• Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HBG-100/160 only)

HLG Series 40W~600W

• 90~305VAC input, built-in active PFC function
• 96% high efficiency (HLG-600H)
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Function options: output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming
• Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries
• Suitable for LED street lighting, outdoor LED lighting and general outdoor applications with high IP requirement

HLG-C Series 70W~480W

• 90~305VAC input, built-in active PFC function
• Constant current output with high output voltage >60VDC
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Function options: output adjustable via potentiometer; 3 in 1 dimming (1~10Vdc or 10V PWM signal or resistance); timer dimming; smart timer dimming
• Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (HLG-240H-C/320H-C only)
• Suitable for LED street lighting and outdoor LED lighting

HVG(C) Series 65W~1000W

• Wide input range 180~528VAC
• Metal case, IP67/IP65 design for indoor or outdoor installations
• Built-in active PFC function
• Function options: output adjustable via potentiometer; 3 in 1 dimming (0~10Vdc or 10V PWM signal or resistance, dim-to-off); timer dimming; smart timer dimming
• Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (except for HVG-65 and HVGC-65)
• Suitable for LED street lighting and outdoor LED lighting applications

LDB-L/LW Series 300/350/500/600mA

• Constant current DC/DC buck-boost LED driver
• High efficiency up to 91%
• Comply with EN55015 and FCC part 15 without additional input filter and capacitors
• PWM dimming and remote ON/OFF control
• Suitable for buck-boost type lighting systems (additional mother board is required)
• Pin, wire style for choice

LDH Series 350~1750mA

• Constant current output DC/DC step-up LED driver
• High efficiency up to 95%
• Comply with EN55015 without additional any components
• PWM+analog dimming and remote ON/OFF control
• Suitable for boost type lighting systems (Additional mother board is required)
• Pin, wire style for choice

LP Series 18W~150W

• 90~264VAC input (except for 18W and 150W)
• Slim plastic case with IP67 level
• Economical design
• Withstand 300VAC surge input for 5 seconds (LPV/C-20/35/60/100)
• -30~70℃ wide operation range
• Suitable for economical LED lighting and moving sign applications

XLG Series 20W~320W

• Wide input range 100~305VAC (90~305VAC for XLG-20)
• Constant power mode with adjustable output current (Constant current mode for XLG-20)
• Built-in active PFC function and Efficiency up to 90%
• Dimming functions: 3 in 1 / DALI
• Protections: Short circuit/ Over voltage/ Over temperature
• Surge protection with 6KV(L/N-FG)/4KV(L-N); 4KV(L/N-FG)/2KV(L-N) for XLG-20

XBG Series 100W~240W

• Wide range 100~305VAC mains input
• Built-in active PFC function and constant power mode
• AC input cable with waterproof connector for flexible using
• Surge protection: 6 KV /4KV
• Protections: short circuit, over voltage, over temperature
• Life time >50,000 Hrs. and 5 years warranty

XLC Series 25W~60W

• Constant power design with wide range current adjustable (H type)
• Constant voltage output models available (12V/24V/48V)
• Full voltage input 110~305VAC (with PFC function)
• Plastic case with double insulation and Class II/2 design
• Compliant with IEEE 1789 and ErP flicker-free standards
• Standby power consumption <0.5W

XLC-MA Series 25W~60W

• Matter-certified device, compliant with the Matter 1.3 specification
• Based on Matter over Thread technology
• Constant power design with a wide adjustable output current range (H type)
• Constant voltage output models available: 12V/24V/48V
• Flicker-free design, compliant with CE ErP directive
• Suitable for emergency lighting (EL) applications

XLN Series 25W~60W

• Constant power design with wide range current adjustable (H type)
• Constant voltage output models available (12V/24V/48V)
• Output current adjusted by NFC sensing
• Full voltage input 110~305VAC (with PFC function)
• Plastic case with double insulation and Class II/2 design
• Compliant with IEEE 1789 and ErP flicker-free standards

LDC Series 35W~80W

• Constant power output
• Flicker free design
• 3 in 1 dimming：0~10Vdc、PMW signal or resistance
• Built-in active PFC function
• No load power consumption <0.5W
• working temperature： -25~+90℃

DLC-02 8W

• Comply with IEC 62386 DALI-2, and Part 101/103/207/208/301/302/303/304
• 2 x channels of DALI bus, for control gear and control device using
• 4 x programmable relays, for electrical switch or curtains control
• DLC software for system settings or remotely through internet
• Built-in LCD display and control buttons to set and view settings
• Built-in timer IC, commission schedule

NHDD Series 40W

• Constant current mode output
• For DC 380V BUS lighting luminaire driver on board (DoB) solution available
• Plastic housing and fully encapsolated
• Built-in PWM and remote ON/OFF control
• Protections: Short circuit / Over temperature
• 5 years warranty

SPWM Series 75W~240W

• Supports multiple output modes including dimming, colour temperature, RGBW
• Constant voltage PWM style output with 1 or 4 channels
• Standby power consumption <0.5W
• Flicker free, complying with CE ErP directive
• Minimum dimming level 0.1%
• 5 years warranty

SLD Series 50~150W

• Wide input range 110~305VAC (120~305VAC for SLD-150)
• Slim and linear housing design
• Built-in active PFC function and efficiency up to 90% (up to 93% for SLD-150)
• Design with class 2/II and SELV
• Protections: Short circuit/ Over voltage/ Over temperature
• 3 years warranty (5 years warranty for SLD-150)

PCD Series 16W~60W

• 16W/25W: 90~135VAC or 180~295VAC 40W/60W: 180~295VAC
• AC phase-cut dimming, work with leading and trailing edge TRIAC dimmers
• Fully isolated plastic case with IP42 level
• Built-in active PFC function
• Class II design, without FG
• Constant current mode

LDD-L/ LDD-H/ LDDS-H/ NLDD-H Series 300/350/500/600/700mA

• Constant current output DC/DC step-down converter
• High efficiency up to 97%
• Built-in PWM dimming and remote ON/OFF control
• Fully encapsulated with IP67 level for pin and wire style
• Suitable for driving illumination LED
• 3 years warranty

DLP-04 Series 4W

• 90~295VAC full range input
• Slim design
• Plastic case with class II
• No load/standby power consumption<0.5w( type L)
• Withstand 300VAC surge input for 5 seconds
• -20~+60℃ working temperature

PLD Series 16W~60W

• 16W: 90~135VAC or 180~295VAC 25W: 90~295VAC 40W/60W: 180~295VAC
• Built-in active PFC function
• Fully isolated plastic case with IP42 level
• Class II design, without FG
• Constant current mode
• Suitable for indoor LED lighting

PLM Series 12W~40W

• 110~295VAC input (180~295VAC input for E type)
• Built-in active PFC function
• Fully isolated plastic case with IP30 level
• Class II design, without FG
• Push terminal I/O
• Constant current mode

GSV Series 30W~60W

• Various DC Plug Converter available
• Class II/2 power unit, no FG
• Constant voltage design
• Built-in active PFC function with EN61347-1 regulation
• No load power consumption<0.5W

LPF Series 16W~90W

• 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP67 level (16W optional)
• Class II design, without FG
• Built-in 3 in 1 dimming function for D type (1~10VDC, PWM signal or resistance)
• Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPF-90/90D)
• Suitable for LED lighting and moving sign applications

NPF Series 40W~200W

• 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP67 level
• Class II design, without FG
• No load/standby power consumption<0.15W (<0.5W for D type)
• Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off ) for D type
• Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries [NPF-40(D)/-60(D)/-120(D) only]

PWM Series 40W~200W

• 90~305VAC input, built-in active PFC function
• Fully isolated plastic case with IP67 level
• Constant voltage PWM style output
• Class II design, without FG
• No load power consumption<0.5W
• Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off)

PLC Series 30W~96W

• 90~264VAC input, built-in active PFC function
• Fully isolated plastic case with screw terminal style of I/O
• Suitable for indoor LED lighting and moving sign applications

PLN Series 20W~96W

• 90~295VAC input (90~277VAC for PLN-20), built-in active PFC function
• Fully isolated plastic case with IP64 level
• Suitable for indoor LED lighting and moving sign applications

LCM Series 25W~60W

• 180~295VAC input for 40W/60W, 180~277VAC input for 25W
• Constant current mode
• Built-in active PFC function
• Multiple-stage output current level selectable by DIP switch
• Built-in 3 in 1 dimming function for non DA2 type (0~10VDC, PWM signal or resistance, dim-to-off)
• Built-in DALI-2 interface and push dimming function for DA2 type

LCM-U Series 40W~60W

• 90~132VAC input only
• Constant current mode
• Built-in active PFC function
• Multiple-stage output current level selectable by DIP switch
• Built-in 3 in 1 dimming function for non DA type (0~10VDC, PWM signal or resistance, dim-to-off)
• Built-in DALI interface and push dimming function for DA type

PLP Series 30W~60W

• 90~264VAC input , built-in active PFC function
• Suitable for built-in LED lighting systems

↑ 맨 위로

LED 조광·주변 장치 AC/DC › LED Accessory

DALI-2 Touch Panel NA

• DALI-2 certified Touch panel
• Compliant with IEC-62386-301 Push button
• Powered by DALI Bus
• Each Button with multiple trigger modes: Short Press/ Double press/ Long press

DALI-2 PIR Motion Sensor NA

• DALI-2 certified PIR motion sensor
• Compliant with IEC-62386-101/ 103/ 303/ 304 standards
• Compatible with DALI-2 controllers, such as MEAN WELL DLC-02
• Powered diredtly from DALI Bus
• PIR sensing technology
• Built-in daylight sensor

DAP-04 NA

• 90~305VAC input
• Convert DALI signal to PWM signal
• 4 DALI addressable output channels
• Meet DALI standards(IEC62386-101,102,207)
• Suitable to use along with MEAN WELL's AC/DC LED PSU with 3 in 1 dimming function

SPD Series NA

• 10kA/20kA surge protection device
• Line to Ground & Line to Line protected
• Suitable for surge protection of LED drivers
• IP66/67 design for indoor or outdoor installations

COB LED Strips

• COB LED packaging, no light spots
• CRI >90 and soft light
• 4KV ESD testing
• Wide beam angle with 180°
• 5M per reel, can be cut and used every 5cm
• CE/BIS certification

↑ 맨 위로

자료: MEAN WELL 홈페이지 제품 시리즈 목록 (www.meanwell.com, 2026-10-27 확인) · 특징 문구는 제조사 원문이며, 정확한 값은 데이터시트를 확인해 주세요. 가격·재고는 e구로 부품검색에서 품번으로 찾아 견적요청하실 수 있습니다.